Products

Protective Relay Testing

  • STATES FMS Test Paddle/Plug | Test Paddle/Plug

    The NEW STATES® 10 and 14 pole potential test paddles are feature packed and have been designed to make a test technician's job easier.

    View More
  • STATES FMS Test Switches | Test Switches

    The STATES Type FMS Semiflush-Mounted Test Switches provide a compact, versatile means to disconnect, test or measure devices and circuits in panelboards such as relays, metering, control circuits and other instrumentation applications. The FMS Switch works without instrument transformers being disconnected from secondary wiring

    View More
  • Megger SMRT36D | Smart Grid Relay Test System

    The SMRT36D is a multipurpose, light-weight, field portable test set capable of testing a wide variety of electro-mechanical, solid-state and microprocessor-based protective relays, small molded case circuit breakers, motor overload relays and similar protective devices.

    View More
  • Megger SVERKER 750/780 | 1-Phase Relay Tester

    The SVERKER750 and SVERKER780 Relay Test Set are the engineer's toolbox. The control panel features a logical layout, SVERKER 650 users will find it comfortably familiar and will be able to start work right away. The SVERKER750 and SVERKER780 features many functions that make relay testing more efficient. For example, its powerful measurement section can display (in addition to time, voltage and current) Z, R, X, S, P, Q, phase angle and cos ?. The voltmeter can also be used as a 2nd ammeter (when testing differential relays for example). All values are presented on a single easy-to-read display. You can also test directional protective equipment efficiantly by means of the built-in variable voltage source. In SVERKER780 this has a continuous phase shift function and adjustable frequency as well. Automatic reclosing devices can also be tested – just as easily. Designed to comply with EU standards and other personal and operational safety standards, SVERKER750 and SVERKER780 are also equipped with a serial port for communication with personal computers and the PC software SVERKER Win.

    View More
  • Megger SVERKER 650 | 1-Phase Relay Tester

    The Sverker 650 testing unit, whose design incorporates benefits gleaned from many years of experience in field relay testing, enjoys a well-earned reputation for reliability and convenience. Compact and powerful, it provides all of the functions needed for secondary testing of almost all types of single-phase protection now available on the market.

    View More
  • Megger PAM410 | Phase Angle Meter

    The PAM410 is specifically designed for measurements on electrical power systems. It is capable of displaying the phase angle relationship between two power signals, which can be two currents, two voltages or any combination. Currents up to 25 A and voltages up to 500 V can be applied directly to the instrument. The current input range can be extended by using external current transformers.

    View More
  • Megger PAM420 | Phase Angle Meter

    The PAM420 is specifically designed for measurements on electrical power systems. It is capable of displaying phase angle, voltage, current, frequency and timing. The phase angle is calculated from the relationship between two power signals, which can be two currents, two voltages or any combination. Currents up to 25 A and voltages up to 500 V can be applied directly to the instrument. The current input range can be extended by using external current transformers.

    View More
  • Megger SMRT Series | 3-Phase Relay Tester

    The SMRT Series test system may be customized by adding the number of Voltage-Current, “VIGEN”, modules needed for specific test applications. The SMRT Series has the “smart” combination of high compliance voltage and high current to test all electromechanical, solid-state and microprocessor-based overcurrent relays, including voltage controlled, voltage restraint and high impedance directional ground overcurrent. The SMRT Series provides a complete multi-phase test system for commissioning of protection systems. The SMRT Series test system has the ability to be manually controlled with Megger’s new Smart Touch View Interface™ (STVI). The STVI, with its large, full color, high resolution, TFT LCD touch screen allows the user to perform manual, steady-state and dynamic testing quickly and easily using the manual test screen, as well as using built-in preset test routines for most popular relays. The STVI eliminates the need for a computer when testing virtually all types of relays. Menu screens and touch screen function buttons are provided to quickly and easily select the desired test function. Tests results can be saved to the STVI for download to a memory stick to transfer or print test reports. For full automatic testing the SMRT Series may be controlled by Megger Advanced Visual Test Software (AVTS). AVTS is a Microsoft® Windows® XP®/Vista™/7 compatible software program designed to manage all aspects of protective relay testing using the new Megger SMRT.

    View More
  • Megger GOOSER | IEC 61850 Test System

    The GOOSE message interface provides two physically isolated Ethernet ports to safeguard your network from unwelcome erroneous messages from your PC, as the isolated ports do not allow communication from the direction of the PC to the Network. GOOSE message interface can convert IEC61850 GOOSE messages coming from the rear Ethernet port to physical binary output and it converts a binary input physical contact (voltage or contact) into GOOSE message publication. GOOSE message interface has 10 binary inputs and 10 binary outputs. In addition, GOOSE message interface can be used by control engineers who do not need relay test sets to check and simulate the interlocking system using send/receive GOOSE messages

    View More
  • Megger SMRT1 | 1-Phase Relay Tester

    As a stand-alone unit the SMRT1 has the “smart” combination of high compliance voltage and high current to test electromechanical, solid-state and microprocessor-based overcurrent relays, including voltage controlled, voltage restraint and directional overcurrent; test under/over voltage, single-phase impedance, single-phase power, directional, synchronizing, auto-synchronizing, negative sequence under/over voltage, current balance, frequency, volts/hertz, reclosing, thermal, and various other relays, see the Applications Guide for more. The SMRT1 test system has the ability to be manually controlled with Megger’s new Smart Touch View Interface™ (STVI). The STVI, with its large, full color, high resolution, TFT LCD touch screen allows the user to perform manual, steady-state and dynamic testing quickly and easily using the manual test screen, as well as using built-in preset test routines for most popular relays. The STVI eliminates the need for a computer when testing virtually all types of relays. Menu screens and touch screen function buttons are provided to quickly and easily select the desired test function. Tests results can be saved to the PowerDB™ ONBOARD for download to a memory stick to transfer or print test reports. For full automatic testing the SMRT1 may be controlled by Megger Advanced Visual Test Software (AVTS). AVTS is a Microsoft® Windows® XP®/Vista™/7 compatible software program designed to manage all aspects of protective relay testing using the new Megger SMRT.

    View More
  • Megger Magnus | Step-Up Transformer

    When power systems are put into operation or when faults occur, it becomes necessary to check the instrument transformers to make sure that they are providing test instruments and protective relay equipment with the correct outputs. MAGNUS™ permits you to prepare excitation curves for instrument transformers quickly and easily. MAGNUS is also used to demagnetize current transformer cores and to conduct turn-ratio tests on voltage transformers. Even though it weighs only 16 kg (35 lbs), it provides 1 A at 2.2 kV. Two-hand control enhances personal safety. As standard, MAGNUS is delivered with a special high-voltage cable and a robust transport case.

    View More
  • FREJA543 Relay test system

    Fully automated testing using FREJA Win software Stand-alone operation using intuitive high resolution graphic touchscreen, no PC required to operate 4 Voltage channels, 3 Current channels High current, high power output – up to 60 Amps / 300 VA rms per phase Dynamic GPS satellite synchronized end-to-end testing capability IEC 61850 testing capability

    View More
  • FREJA546 Relay Test System

    Fully automated testing using FREJA Win software Stand-alone operation using intuitive high resolution graphic touchscreen, no PC required to operate High current, high power output – up to 60 Amps / 300 VA rms per phase 4 Voltage channels, 3 Current channels, with convertible voltage channels provides 1 voltage and 6 currents Dynamic GPS Satellite Synchronized End-to-End Testing Capability IEC 61850 Testing Capability

    View More
  • SMRT33 Megger Relay Test System

    Small, rugged, lightweight and powerful Operate with or without a computer Intuitive manual operation with Smart Touch View Interface High current, high power output - (45 Amps/300 VA rms) per phase Network interface provides IEC 61850 test capabilities Fully automated testing using AVTS software Optional transducer test capability

    View More
  • SMRT410 Megger Relay Test System

    Small, rugged, lightweight and powerful Operates with or without a computer Intuitive manual operation with Smart Touch View Interface High current, high power output (60 Amps/300 VA rms) per phase Flexible output design provides up to four-phase voltage and up to ten-phase current Network interface provides IEC 61850 test capabilities Fully automated testing using AVTS software

    View More
  • SMRT410D Multi-phase relay test system

    Integrated Smart Touch View Interface. Multi-colored graphics with intuitive navigation Stand-alone operation, no PC required to operate High current output - 60 Amps at 300 VA per phase Flexible output design provides up to 10 currents Dynamic, Transient and GPS Satellite Synchronized End-to- End Testing Capability IEC 61850 Testing Capability

    View More
  • SMRT43 Multi-phase relay tester

    Small, rugged, lightweight and powerful Operate with or without a computer Intuitive manual operation with Smart Touch View Interface vHigh current, high power output (45 Amps/300 VA rms) per phase 4 Voltage channels, 3 Current channels Dynamic, Transient and GPS Satellite Synchronized End-to-End Testing Capability IEC 61850 Testing Capability

    View More
  • SMRT43D Relay test system with touch screen, 3 voltages, 3 current channels

    Integrated Smart Touch View Interface™ provides stand-alone operation using intuitive high resolution graphic touchscreen, no PC required to operate 4 Voltage channels, 3 Current channels High current output - 45 Amps at 300 VA per phase Dynamic, Transient and GPS Satellite Synchronized End-to-End Testing Capability IEC 61850 Testing Capability

    View More
  • SMRT46 Multi-phase relay tester

    Small, rugged, lightweight and powerful Operate with or without a computer Intuitive manual operation with Smart Touch View Interface vHigh current, high power output (60 Amps/300 VA rms) per phase 4 Voltage channels, 3 Current channels, with convertible voltage channels provides 1 voltage and 6 currents Dynamic, Transient and GPS Satellite Synchronized End-to-End Testing Capability IEC 61850 Testing Capability

    View More
  • SMRT46D Multi-phase Relay Tester

    Integrated Smart Touch View Interface™ provides stand-alone operation using intuitive high resolution graphic touchscreen, no PC required to operate 4 Voltage channels, 3 Current channels, with convertible voltage channels provides 1 voltage and 6 currents High current output - 60 Amps at 300 VA per phase Convertible voltage channels – 15 Amps at 120 VA Dynamic, Transient and GPS Satellite Synchronized End-to-End Testing Capability IEC 61850 Testing Capability

    View More
  • STVI Smart Touch View Interface Handheld Controller for SMRT and MPRT

    Large High Resolution Color TFT LCD touch-screen intuitive smart navigation makes testing relays easier Designed for either right or left handed operation with control knob centrally located Automatic Ramp, Pulse Ramp, Binary Search and Pulse Ramp Binary Search Capability for pick up and dropout tests Overcurrent Relay Test includes IEC, IEEE and hundreds of Specific Relay Time-Curves Built-in Dynamic Testing Capability, Multi-Shot Trip and Reclose “Sequencing” test screen Save/View/Print results from internal PowerDB OnBoard Download results via USB to print

    View More
  • SVERKER900 Relay and substation test system

    The testbox for substation 3-phase testing Three currents and four voltages Stand-alone functionality Rugged and reliable for field use Generation of 900 V and 105 A in single phase mode Secondary and primary testing

    View More
  • PCITS2000/2 Primary current injection test sets

    Test relay protection systems and their current transformers together Current level maintained though test circuit resistance may rise due to heating Built-in timer to record protection relay operation

    View More
  • ERTS Electronic Recloser Test Simulator

    Rugged, Small, Light Weight, Field Portable 14, 19, and 32 pin Cable Adapters Built-in Used with Megger Relay Test Systems Simulate Three-Pole or Single-Pole Trip and Reclose Use Sequencer Test to Easily Perform Trip and Reclose Tests on both Electronic Controller and Recloser

    View More
  • MGTR-II GPS timing reference

    Small and lightweight Easy to use programmable output pulse for synchronized end-to-end testing 100 ns accuracy within minutes of startup, 12-channel GPS timing receiver Near-Rubidium stability during temporary GPS signal loss IRIG-B serial time code output Standard one pulse-per-second (PPS) output Event time tag (ETT) time stamp with 100 ns resolution

    View More
  • MLCA Low current adapter

    Interfaces with Megger relay test sets to provide high accuracy at very low test currents.

    View More
  • NTS300A Network relay tester

    50 ft (15 m) test cable Two-piece design for easy portability Solid-state, digital timer Additional phase angle settings for testing protectors that incorporate solid-state relays High current output for instantaneous test High output power for mechanical low voltage closing tests

    View More
  • PMM-1 Power multifunction measuring instrument

    Simultaneous measurement and display of all three-phase system parameters Accurate phase angle measurement at low current levels Versatile, menu-driven instrument with a built-in timer and data-logging

    View More
  • SST9203 Solid-state digital timer

    Versatile timing instrument for many utility applications Rugged design for years of daily field use ±0.0001-second accuracy Battery or line operated

    View More
  • TM200 Digital timer

    Rugged and compact Precise Broad application range Contact or voltage trig

    View More
  • AVTS Advanced Visual Test Software

    Export to Word changes (note that export to Word options are now located in the Tools, Export to Word menu) Updates to address slow dongle detection Enhanced conversion of very large Digital Recording Files (DFR) files Fixed the dfr waitany “removed” for playback trigger (voltage or contact) Enhanced the Dynamic Control when used in a Loop to address timing issues Tc50/60 issue with SMRT. Trip times from Pulsar and MPRT are sent back in seconds, and AVTS converts to cycles – SMRT sends time back in cycles in when timing in the Cycles mode Bat Sim VDC value is now stored as a variable (variable is “AVTSVDC”) AVTS Help now opens on “Contents” tab Add ability to resize the calc control box Fixed “paste” data from Notepad into the calc control Added Triggered Playback button to execute end-to-end test directly from the DFR Testing Screen

    View More
  • RTMS Relay test and management software

    RTMS is available in Standard and Enhanced levels

    View More
  • CA30 Current amplifier

    High output and compliance voltage Patent pending technology Designed for integration with FREJA 300 to boost power and capability

    View More